Drywall finishing in New Berlin
The finish is what you see every day. Here’s how to choose the right one, and how we deliver it.
Get a free estimate
The short version
Level 4 is the standard smooth finish for most rooms. Level 5 adds a full skim coat and is best for bright rooms and shinier paints. We can also skim over old texture to make walls smooth.
Here’s something most people don’t find out until after the painters leave: paint doesn’t hide anything. If the wall underneath has ridges or visible seams, a fresh coat just makes them shinier.
So the finish matters. It’s the last thing we do and the first thing you’ll notice. Our job is to help you pick the right level for each room, and then make it look the way you pictured.
Finish levels, simply
Finishers grade their work from Level 0 to Level 5. You only need to know two. Level 4 means the seams and screws have three coats and the wall is sanded smooth. It’s what most homes have and it looks great with flat or matte paint.
Level 5 takes it one step further with a thin coat of compound over the entire wall. That evens everything out so seams can’t show through, even with sunlight streaming along the wall or a satin paint.
When Level 5 is worth it
Rooms with lots of windows
Side light shows every flaw.
Satin, semi-gloss or dark paint
Shine and deep color magnify seams.
Ceilings with recessed lights
They throw light sideways across the surface.
Long hallways
You look down the length of the wall.
Going from textured to smooth
A skim coat is how it’s done.
Our finishing process
Talk it through
Lighting, paint and budget, room by room.
Apply the coats
With proper drying time in between.
Skim if needed
A full coat for Level 5 areas.
Sand with a light
A bright lamp shows us what you’d see later.
Final look together
You check it before we go.
Smooth or textured?
Smooth walls are the modern favorite and they’re easier to patch invisibly down the road. They do show dings more readily.
A light orange peel or knockdown texture is more forgiving and a bit less expensive. It’s also what many New Berlin homes already have, so if we’re only doing part of a room, matching it makes sense. We’ll show you samples of each.
What a good finish gives you
Paint that looks professional
Even if you do the painting yourself.
No ghost lines
Seams stay hidden in every light.
Freedom to choose any paint
Including darker or shinier ones.
A room that feels finished
It’s subtle, but you feel it.
What makes finishing cost more or less
Finishing comes in levels, and the level you pick is the main thing that sets the price. Most rooms get what’s called Level 4: three coats over every seam and screw, sanded smooth. It’s the standard for walls that will be painted in a flat or matte paint.
Level 5 goes one step further. We spread a thin coat of compound over the entire wall or ceiling, not just the seams. That gives the paint a perfectly even surface to sit on. It costs more because we’re covering every square foot one more time.
The condition of the walls matters too. Finishing brand-new drywall is one job. Smoothing out old walls with years of patches and bumps is a bigger one.
Do I really need the top level?
Probably not everywhere. And we’ll tell you that honestly, even though the higher level is more work for us.
Here’s a simple way to decide. Stand in the room in the late afternoon and look along the walls and ceiling toward the windows. If you can see light sliding across a surface, that’s a spot where seams might show. Big windows, skylights and long hallways are the usual suspects.
Paint matters just as much. Flat paint is forgiving. Eggshell shows a bit more. Satin and semi-gloss show everything. Dark colors do too. If you’re painting a feature wall navy, it’s worth finishing that wall to the higher level.
For most New Berlin homes, a mix works well. The top finish on the main living area ceiling and the walls that get strong light, and the standard finish in bedrooms, closets and the basement.
Can old, bumpy walls be made smooth?
Yes. This is one of our favorite jobs, because the difference is so obvious. Walls that have been patched and repainted for decades pick up ridges, roller marks and little humps. A skim coat covers all of it.
We scrape off anything loose, fill the low spots, and then spread a thin layer of compound over the whole wall, usually twice. After sanding, it looks like new drywall. The same method turns a textured wall into a smooth one.
It does take time, and the room will be out of use for several days. But if you’re planning to repaint anyway and you’ve never liked the look of the walls, it’s the best moment to do it.
How to check our work
We want you to look closely. Here’s how to do it the way a painter would.
- Hold a bright flashlight flat against the wall and shine it sideways. Flaws cast a shadow.
- Run your palm across the seams. You shouldn’t feel where they start or stop.
- Check the corners. Inside corners should be straight. Outside corners should feel smooth.
- Mark anything you find lightly in pencil, never pen. Ink bleeds through paint.
We do this same check ourselves before we call you over. But two sets of eyes are better than one, and it’s your house.
After that, prime with a primer made for new drywall, and take one more look before the color goes on. Primer has a way of showing tiny things that are easy to fix at that stage.
Before and after


These are stock photos showing the kind of difference this work makes, not one of our own projects.
Finishing for New Berlin homes
Many homes here are being opened up: walls removed between kitchen and living areas, bigger windows, more recessed lighting. All of that looks fantastic and all of it is hard on a basic finish.
If you’re remodeling that way, mention it when we talk. Upgrading the main living area to Level 5 is a small part of the budget and saves a lot of regret.
Good to know
Is a skim coat the same as Level 5?
Close. Level 5 means the standard three coats plus a skim over the whole surface. On old walls, people say skim coat to mean smoothing everything out, which may take two or three passes. Either way, the goal is one even surface for the paint.
Can you finish drywall that someone else hung and taped?
Yes. We’ll look at what’s there, fix anything loose or cracked, and take it the rest of the way. Send a few photos and we can tell you roughly what it needs.
When can I paint?
As soon as the final coat is dry, sanded and dusted off, which is usually the day after our last visit. Prime first with a drywall primer. Then two coats of your color.
Why do my existing walls look streaky?
That’s often the seams showing through as a different sheen. It happens when new drywall was painted without primer, or when shiny paint went over a standard finish. A skim coat and proper primer will fix it.
Does a smooth finish cost more than texture?
Usually a little, yes, because texture hides small flaws and smooth doesn’t. Most people still choose smooth for the main rooms. It looks cleaner and it’s far easier to repair later.
Your questions about drywall finishing
Do I really need Level 5?
Often not. For bedrooms and closets with flat paint, Level 4 is perfect. We’ll only recommend Level 5 where you’d see the difference.
Can you make my textured walls smooth?
Yes. We skim coat over the texture, usually two or three passes, then sand.
Why can I see seams through my paint?
The seams and the drywall paper soak up paint differently. A skim coat and a good primer fix it.
What primer should I use?
A drywall primer-sealer, ideally a high-build one for smooth walls. We’ll point you to the right kind.
Can you finish just one wall?
Yes. Accent walls and fireplace walls are common requests.
You might also need

Drywall Taping & Mudding
Hung it yourself? We’ll do the tricky part.
Learn more
Drywall Installation
New walls and ceilings for additions, remodels and new builds.
Learn more
Popcorn Ceiling Removal
Say goodbye to the bumpy ceiling. We scrape, smooth and get it ready for paint.
Learn more
Residential Drywall Services
Remodels, additions and repairs for New Berlin homeowners.
Learn moreWant a price for this?
Tell us a little about your drywall finishing project in New Berlin and we’ll send a free written estimate.
